Kamikaze Collection Thread

  • Eigentlich ist ein Kamikaze ISM Thread, doch lange überfällig.


    Vor einigen Jahren habe ich einen kleinen Test, ISM V1 vs. Suave 2016 gemacht.
    Diese habe ich zwar blöderweise, frühzeitig abgebrochen, doch mitgenommen habe ich die Erkenntnis, dass das ISM, dem Suave 2016 sehr ähnlich war.
    Na wenn dass mal kein Argument ist, dem teuren Zeug eine Chance zu geben.


    Mittlerweile ist V2 auf dem Markt.
    Verbessert wurden (angeblich) das Beading, die Wiederstandsfähigkeit, sowie der Glanz.
    Den gewohnten Charakter soll das edle Süppchen behalten haben.
    Damit meine ich in erster Linie, die unglaublich stressfreie Verarbeitung.
    Ich kann mich noch gut an ein Gespräch mit einem australischen Aufbereiter erinnern, der das Zeug aufgrund der Temperaturen sehr gerne benutzt. Das aber nur am Rande erwähnt.



    Hier ein paar Infos



    Flexible, Hydrocarbon Ceramic Coating.



    Most ceramic coatings contain solvents, immediately obvious by the strong fumes which emanate from the bottle as soon as it is opened.
    Kamikaze Collection ISM Coat 2.0 is different. Free from volatile organic compounds (VOCs), non-solvent based, ISM Coat blends optically clear hydrocarbons with ceramic components to provide a clear, candy-gloss shine to automotive paintwork.


    Features & Benefits:

    • Easy to apply & easy to buff off
    • Provides a candy-gloss, reflective shine
    • Lasts for 24 - 36 months
    • Repels water, dirt & grime
    • Can also be used to restore plastic trim
    • Designed to resists water spotting better than traditional ceramic coatings
    • Non-solvent based, non-flammable & VOC-free - easy to transport & environmentally safe
    • For higher gloss & increased hydrophobicity, apply a layer of Kamikaze Collection Over Coat

    Directions for use:

    • Wash and dry the vehicle.
    • Polish to remove any paintwork blemishes prior to sealing.
    • Wipe-down with a residue remover.
    • Optimum application conditions: 15-25 °C, Humidity 40-70%.
    • Using a dropper or pipette, apply a few straight lines of ISM 2.0 onto your applicator cloth.
    • Starting with horizontal surfaces first, apply ISM 2.0 in straight lines only (no cross-hatch, no circular application) and slightly overlap from one line to the next. Work in small areas at a time (approx. 24" square).
    • Immediately start your removal process otherwise the coating will become difficult to remove and may leave a smeary finish. If this happens, apply more product on top of the affected area and immediately remove.
    • Using two different microfibres, MF1 for the initial wipe, and MF6 for the second wipe.
    • Thoroughly wipe down the section to remove the residue. Your first wipe should remove 80% of the residue, and your second wipe should easily remove the remainder. Use small, circular motions and little to no pressure during removal.
    • Multiple coats are not necessary.
    • Infrared (IR) curing? set lamps at 70-75 °C for 10-15 minutes per panel.
    • Keep dry for a minimum of 24 hours and do not wash the vehicle for 7 days.
    • Maintain using Kamikaze Collection Over Coat for additional gloss & hydrophobicity.

    Technical Specification:

    • VOC-free
    • Non-solvent based
    • Non-flammable
    • Durability: 24-36 months
    • Water contact angle: 105 degrees
    • pH tolerance: 2-11
    • Thickness layer: 2 microns
    • Hardness: 3-4H (pencil scale)
    • Initial curing time: 5-30 mins depending on ambient air temperature
    • Full curing time: 7 days
    • Coverage: 30ml = 1-2 cars

    Size: 30ml


    Preis: knapp 140€


    Jetzt würde ich gerne weitere Erfahrungen Sammeln, und suche 2 Leute die sich eine Flasche mit mir teilen wollen.
    Für jeden also 10 ml. Pro Kopf 47€, inkl. Versand zu euch.


    Na, wer hat Bock? :D

  • Dann schicke ich euch gleich meine PayPal Adresse und bestelle schnellstmöglich.


    Konnte bezüglich Kratzschutz, damals keinen Unterschied zum Suave 2016 feststellen.
    Und dass war gut.


    Nachrichten sind raus.